VW-TDI-help
i just got a new buggy with a 1.6 tdi in it. the motor needs a little love and i know little to nothing when it comes to vw tdi motors. does anyone know someone that can help me freshen up the...
View ArticleAdjustable Panhard
Looking for someone that could build an adjustable panhard for a second gen. Ping me if you know someone.
View Articledent repair
anybody know of a place to pull out dents for cheap? got this over the weekend and i wanna pull it out, dont care to much about the paint either just the big ass dents. Heres the damage:
View ArticleFab Shops/ People?
Hey everyone, I'm looking at picking up some Bolt-on sliders for my 04 double cab tacoma. I really like the Demello Off-road set, but the shipping is brutal. I was wondering you all know of good fab...
View ArticleBall joints and control arms...
So here's the deal I need to replace my ubj, lbj and uca bushings. I have been playing with the idea of light racing uca from toytec because of the ease of parts replacement. I am running toytec...
View ArticleInner Tie Rod Ends
WTH-I replaced them this summer, run a couple of trails and they are trashed already! I have a 2006 4 Runner, 33's and a Toytec lift. I replaced them with the most expensive ones that Napa had. I went...
View Articlebrake fade on 2006 4 runner
any body heard of bad brakes on the 4th gen 4 runners? went to stop yesterday and pedal went to the floor, scared the hell out of me and i have looked around on 4 runner forums and havent come up with...
View Article1980 OEM FJ parts
Hey guys i have a co-worker that is looking for a website for OEM Toyota parts for his 1980 FJ40. i checked out TRDparts4u.com and ToyotaofDallas.com but they didn't have any. so if you know of a good...
View ArticleSticky check
Howdy campers. Long time, no see. I'm in the process of getting the Runner ready for summer fun. It needs a few things that are beyond my skillset and available time. Is the sticky of recommended shops...
View Articlearb issues
So my buddy Jeff broke his rear axle. Before he did that his arb compressor worked great. Now it cycles all the time. I pulled the diff today and it looks clean nothing in it. I didn't take it apart...
View Articlesteering box?
So what's the difference between steering boxes from the 80s and 90s? I pulled mine off the crusher and its an 80s. Went down to the junkyard and grabbed a 90s box and they are a little different. The...
View ArticleLocking hub questions
I have a set of ifs hubs thanks to konayota (Russ) . I have a 85 front axle . I know that the ifs locking hubs are 26 spline and solid axle is 30 If I ordered the chromoly hubs from trail gear .( $150)...
View ArticleVibration
So my 02 taco has developed a vibration. At first I just didn't care but now its annoying me. Its all the time when I'm driving. Not when I'm stopped. I checked the driveshaft, wheel weights, steering,...
View ArticleClutch replacement?
I am going to do the clutch in my truck, after ruining it at French Creek. I have a lifetime clutch through AutoZone but not sure if I want to go with that one again. I would like a Marlin 1200 lb but...
View ArticleTrunnion bearings
Anybody have any experience or insight on these "trunnions upgrades"? http://www.cutthroat4x4.com/catalog/product_info.php?products_id=93
View ArticleDrilling dowel pins / replace .Please Help !!!!!!!
I snapped all my hub studs / dowel pins .. I extracted the hub studs . So that's not the issue . I bought a harbor freight drill press and tried to use that ( cheap and didnt want to push it past its...
View ArticleCv axles
Both of the boots are ripped and leaking on both cv axles on my 99 runner. So I am replacing the whole axle assembly with new. Do I go with toyota oem or rebuilts from auto parts store? Or any favorite...
View ArticleToyota c clip won't snap onto birfield
Little bit of back ground - I have dirty30s . I did grind out my knuckle ball . And have wheeled for a while now with mile marker hubs , trail-gear flanges .... I recently got Chromolly hub gears and...
View Article35's and gearing
Short version: I need to replace my front and rear diffs due to damage. I had re-geared my diffs on my 03 Taco to 4.56 about 10 years ago. I have IFS/ADD/ABS on the front and an elocker on the rear...
View ArticleGood clutch shop in Denver Area
Anybody have any recommendations for a good clutch shop in the Denver Area? I have had some notchy shifting, sometimes some chatter and it is hard to gt in gear anymore. I dont think the clutch has...
View Article
More Pages to Explore .....